Welcome, Guest Login

Support Center

LightCam 40HD Quick Start Guide (QSD)

Last Updated: Sep 20, 2018 02:38PM CDT
Attached is the Quick Start Guide for the LightCam 40HD.

There are a couple of corrections that can be made to clear up any confusion in the QSG:
  1. In step 3 (for iPhone) and step 4 (for Android), while connecting to the LightCam 40HD using P2P, the camera will show a WiFi SSID that will have the name MyHomeCam and the last 6 digits of the product serial number.  When connecting to this WiFi SSID, there is no need for a password.
  2. In step 5, click the three dot button as shown in the QSG.  Then in the Settings screen you will have to click on "WLAN Networks" at the bottom of the screen, not "Wi-Fi Networks" as described in the QSG.  Then select your home WiFi network and put in the password as described in the QSG.  Then, the camera will drop its internal SSID and connect to your home WiFi.  Make sure the mobile device also reconnects to the home WiFi.
  3. First time users will want to set the motion detection

Contact Us

seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found